- EN137:2006 Type 2, MED Approved Breathing Apparatus
- Designed for use by the Fire Service or the Oil & Gas market
- Rigid backframe construction
For use by the fire service in the oil and gas fire fighting market, 3M Scott Safety have produced the ProPak-F Firefighting Breathing Apparatus.
As a testement to the quality of the 3M Scott Safety ProPak range, all ProPak breathing apparatus has been approved to EN137:2006 Type 2, incorporating the stringent Full Flame Engulfment Test, and to the 9th amendment of the MED which gives the 3M Scott Safety ProPak the latest approval for the Marine industry.
Compact positive pressure demand valve featuring servo-assisted, tilting diaphragm mechanism with low inspiratory resistance and responsive dynamic performance, automatic first breath actuation and hands free bypass facility.
First stage pressure reducing valve featuring non-adjustable, spring loaded piston mechanism and outlet supply protected by pressure relief valve.
- Stainless steel swivel hose fittings
- Medium pressure hose
- High pressure hose
- Medium working pressure 16 bar
- Minimum burst pressure 80 bar
- Maximum working pressure 450 bar
- Minimum burst pressure 800 bar
PRESSURE INDICATOR & WARNING WHISTLE
Bourdon tube type dial indicator
Heat and Impact resistant polycarbonate lens
Designed to be used with 3M Scott Safety's range of positive pressure full facemasks, the Sabrecom2 is a radio communication interface.
The Sabrecom2 is approved to EN136 class and meets the stringent flame and radiant heat test requirements. The Sabrecom2 is also fully integrated and ready to use.
The 3M Scott Safety ProPak-f can be specified in many configurations including Duo, Split Demand Valve Coupling (SDC), Y-Piece (Y2C) and attachments for Airline, which can be used for Rescue Second Man and Decontamination. Cylinder quick connect and fast fill options are also available.
Pressure Reducing Valve
|Nickel Plated Brass|
|Rust Tube (Cyls)||Brass|
|Reducing Valve Seat||Polyamide (Nylon)|
|O-Rings||Nitrile, Silicone, EPDM|
|Reducing Valve Springs||Stainless Steel|
|HP Pressure Gauge||Stainless Steel, Polycarbonate Lens|
|HP Pressure Gauge Cover||Neoprene|
|MP Air Supply Hose Fittings||Nickel Plated Brass|
|Facemask||Neoprene, Silicone or Procomp|
|MP Air Supply Hose||EPDM Cover, fabric braid reinforcement, EPDM liner|
|HP Air Hose||PTCFE liner, stainless steel braiding, Estane sleeve|
|Valve Handwheel (Cyls)||Glass filled Polyamide/ TPE|
|Harness||Kevlar & Pyrogard blend webbing, reflective thread, Proban covered padding|
|Backplate||Glass and Carbon filled Nylon composite|
|Backpad||Flame retardant cross linked polyolefin closed cell foam covered in a Proban fabric|
|Cylinder Band||Kevlar Pyrogard blend webbing, reflective thread|
|Strap Buckles||Glass filled polyamide|
|Cylinder||Steel or Composite|
|Cylinder Valve||Nickel Plated Brass|
|Demand Valve Casing||Glass filled Polyamide|
|Airline Belt Manifold||MP hose as above with brass fittings|
|Plastic Mounting Mouldings||Glass Filled Polyamide|