Sign up for our latest offers
Newsletter
By submitting your details you consent to their use in accordance with our Privacy Notice
At Cadmus Products we aim to deliver orders efficiently and at highly competitive rates.
The Honeywell Analytics FSL100 Series are Optoelectronic flame detectors for a wide range of Light Industrial fire detection from Honeywell Analytics.
A range of middle market Optical Flame Detectors joining the HA FSX High End products. Addresses a wide range of fire protection applications both indoors and outdoors. With 3 versions to cover a wide range of flaming fires: Ultraviolet (UV), Ultraviolet/Infrared (UVIR) and Triple Infrared (IR3).
Detects wide range of Hydrocarbon & Non-Hydrocarbon fires
Detecting a wide range of Hydrocarbon and Non-Hydrocarbon flaming fires means that many application areas can be addressed.
Wide viewing angle
Optical detection of radiant energy in a solid angle Field of View enables coverage of a large risk area. Simple optional mounting bracket allows the FSL100 to be installed and aligned covering the hazard.
Fast response
Far faster than other technologies, by responding to flaming fires in seconds enabling a more rapid response to danger before the fire can escalate.
Hazardous Area ATEX Zone 2/22, FM Class1, 2 & 3 Div2
Can be installed indoors or outdoors and in Hazardous areas typically looking into a Zone 1 area from a distance.
FM 3260 and EN54-10 performance certs
Certified to FM 3260 and EN54-10 for flame Detector performance.
Relay and current output (Fault and Alarm)
Analogue stepped output and Alarm/Fault relays for simple connectivity.
Inbuilt Automatic Test and Simple to use Test Lamps
FSL100 maintains continuous internal health monitoring. Test lamps enable simple operational and Field of View testing.
Suitable for Many Applications:
Great Performance:
Fast & Reliable:
Reduced Life Cost:
Ease of Installation and Use:
General | |
---|---|
FSL100 Flame Detector types | FSL100-UV, FSL100-UVIR and FSL100-IR3; Choice of red or white housings |
Range | 110 ft /35 m (IR3), 25 m/80 ft (UV, UV/IR) alarming within 10 seconds to a 1 ft2(0.1 m2 )n-heptane fire |
Cone of vision | 90˚minimum horizontal and vertical |
Power | 10-28 VDC (12-24 VDC nominal) |
Local LEDs | - Continuous green: normal operation - Continuous yellow: fault - Flashing yellow: Fault and guide to repeat self-test after a self-test failure - Continuous red: alarm |
Current output | Standard available 4–20 mA (stepped, sinking, non-isolated): - 0 mA power fault / microprocessor fault - 2 mA optical fault - 4 mA normal operation - >20 mA alarm |
Relay output: - Alarm relay - Fault relay |
De-energized during normal operation, no alarm, SPDT, 30 VDC – 2 A, 60 W max. Energised during normal operation, no fault, SPDT, 30 VDC – 2 A, 60 W max. |
Cable gland & terminals | Cable entry M20 clearance. Supplied with gland suitable for cable diameter from 0.2” (5.5mm) to 0.5”(13mm). Terminals suitable for 0.5mm2 (20AWG) to 1.5mm2 (15AWG) wire |
Start up times | <10 sec |
Alarm response time | 8 to 30 sec |
Alarm output settings | Selectable LEDs and relays latching/non-latching; factory setting: latching |
Automatic & manual Self-Test | Automatic Sensor Test (built in Self-Test) and manual Self-Test |
Operating current normal | 25 mA at 24 VDC |
Current in alarm, at 24 VDC | ±75 mA at 24 VDC |
Connections to: | - Fire control panels using end of line (EOL) and alarm resistors (current increase) - Devices that operate via relay switched outputs - PLCs with 4–20 mA inputs |
End of line and alarm resistor | To be adjusted to the fire control panel; free terminals are dedicated to the resistors Note: the alarm and EOL resistor must be rated 2 W min. each and the total power dissipation of both alarm and EOL resistor should not exceed 2 W |
Housing | Glass Reinforced Polyester (GRP), Non-incendive. UV resistant, Self-Extinguishing V–0 (UL-94) |
Swivel Mount | PA66, UV resistant; Stainless Steel fixings; 280 g (0.62 lb) |
Pressure compensating element | PCE (Pressure Compensating Element) avoids moisture build-up in the detector housing due to changes in ambient airpressure |
Dimensions | 4.9 x 3.15 x 2.25 in (125 x 80 x 57 mm) |
Weight | 1.05 lb (465 g) |
Ingress protection | IP65 |
Temperature, operating | –40 ˚F to +158 ˚F (–40 ˚C to +70 ˚C) |
Temperature, ambient ATEX and FM class 3611 | –13 ˚F to +158 ˚F (–25 ˚C to +70 ˚C) |
UV (Ultraviolet) Flame Detector |
|
---|---|
UVIR (Ultraviolet & Infrared) Flame Detector |
|
IR3 (3 Infrared bands) Flame Detector |
|
Accessories |
|
By submitting your details you consent to their use in accordance with our Privacy Notice