Sign up for our latest offers
Newsletter
By submitting your details you consent to their use in accordance with our Privacy Notice
+44 330 088 0595
[email protected]
Please email / call for availability
Product Features
- Simple LaserSense addressing onto ZP loop
- Ribbon cable connection – no hard wiring
- Piggy backs onto detector main board
- Ease of address setting
Delivery options
At Cadmus Products we aim to deliver orders efficiently and at highly competitive rates.
- We can ship consignments of all shapes and sizes and hazardous content across the UK and worldwide. Most of our orders are sent via DHL, however sometimes we may use other couriers.
- If you are purchasing a laboratory product online you can find out the price of shipping checkout. If you are obtaining a quote for a product, then we will email you
with our best shipping prices along with your quote. - Please see our delivery page for full information
The ZP-LSI-1 is an interface that can be attached directly to the main control board of any LaserSense aspirating detector. The card plugs into the main control board inside the detector enclosure. The board enables the detector to be directly addressed and communicate with the ZP3 main control panel.
Detectors are wired onto the loop using plug in terminals located on the LaserSense detector main control board. The detector and interface are easily addressed by switch settings prominently positioned on the card.
Advanced alarm indication
The interface is recognised by the main control panel as device type HSSD and depending upon the analogue signals received and control panel software installed, will provide the following alarm conditions – Fault, Alert, Pre-alarm, Fire. (Alert not displayed on ZP3 panel)
For ZP control panels operating on software prior to version 3.07 confirmation of available signals should be obtained from Ziton sales department.
Up to 127 sensing devices can be connected to each of the control panel loops.
Detectors are wired onto the loop using plug in terminals located on the LaserSense detector main control board. The detector and interface are easily addressed by switch settings prominently positioned on the card.
Advanced alarm indication
The interface is recognised by the main control panel as device type HSSD and depending upon the analogue signals received and control panel software installed, will provide the following alarm conditions – Fault, Alert, Pre-alarm, Fire. (Alert not displayed on ZP3 panel)
For ZP control panels operating on software prior to version 3.07 confirmation of available signals should be obtained from Ziton sales department.
Up to 127 sensing devices can be connected to each of the control panel loops.
Write Your Own Review