Sign up for our latest offers
Newsletter
By submitting your details you consent to their use in accordance with our Privacy Notice
At Cadmus Products, we prioritise efficient order delivery and offer competitive shipping rates worldwide. Our streamlined process ensures clarity and reliability for all your shipping requirements.
The Teledyne Oldham iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs.
Infrared Gas Detector - 1 or 2 Points of Detection from a Single Head
The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up or calibration by superimposing a high-frequency current across the industry standard 4-20mA analog line.
Automatic Sensor Recognition, Access Code Security, and Zero and Cal Fault Protection
Able to detect any combination of gases for a specific environment, iTrans2 utilizes our industry-proven "smart" infrared gas sensor technology and safety features including automatic sensor recognition, access code security, and zero and cal fault protection - all enclosed within an explosion-proof aluminum or stainless steel housing.
The microprocessor-controlled transmitters are capable of independent operation or multi-point system configuration. The infrared sensor provides explosive gas detection (methane, butane, propane, ethylene, hexane, etc.) in more severe environmental conditions, where the presence of poisons could harm the use of a catalytic cell.
In addition to the LEL sensor range, the iTrans2 detector can also be configured with a 0-100% volume methane infrared sensor for bio-gas applications and CO2 infrared sensors ranging from 0.5% volume to 100% volume.
Stand-Alone Operation(*)
With optional on-board relays, this fixed gas detector has the added ability of stand-alone operation, activating alarms, horns, or fans and can also shut down a system without the need to wire back to a central control panel.
(*) versions with local visible alarm are to be installed in ordinary locations only
Sensors | Combustible Gases: Catalytic Toxic / Oxygen: Electrochemical, Infrared (CO2 ) |
Warranty from the date of shipment |
2 years on electronics 3 years on infrared sensors (CO2 ) 2 years on catalytic (LEL), CO and H2 S sensors 18 months on O2 sensors 12 months on other sensors |
Detected Gases | See Ordering Guide |
Material | Epoxy Coated Aluminium or 316 Stainless Stee |
Display | Dual-channel split-screen LED display (4 digit, 7 segment arrangement per channel) provides simultaneous display of one or two gases. |
Input voltage | 12-28VDC operating range (24VDC typical) |
Power Consumption |
150mA@24VDC (Electrochemical sensor) 250mA@24VDC (Combustible gases catalytic) 0.8A peak (single gas) 170mA@24VDC (Infrared) 0.5A peak (single gas) 350mA@24VDC (Combined catalytic/Infrared) 1,2A peak (two gas) |
Ingress Protection | NEMA 4X, IP66 |
Response Time (catalytic methane) | T50: < 10 seconds T90: < 30 seconds |
Humidity Range | 10-90% RH (non-condensing), typical |
Temperature range | (sensor specific) -40°C to +75°C (-40°F to +167°F) |
Dimensions | 127 x 153 x 129 mm (5.0” x 6.0” x 5.1”), 2.9 Kg (6.4 lbs) |
Cable | 3-wire or 4-wire |
Maximum | 15 Ohm (3-wire configs |
Cable Loop | 10 Ohm (4-wire configs) |
Output Signal | Standard: 4-20mA (source) + RS-485 Modbus (9600 baud) Optional: HART Protocol |
Alarm relays (opt) |
3 alarm relays (5 Amps at 30VDC) / Two user-programmable relays, SPST, N.O. |
Homologations Sensor Specific |
One fault relay, SPST, N.C. CCSAUS* Class I, Div 1, Groups B, C, D Ex d IIB + H2 T5 AEx d llB + H2T5 (1) Class I, Div 2, Groups A, B, C, D (2) ATEX and IECEx II 2G - Ex db IIB + H2 T5 Gb (1) II 3G - Ex na IIC T5 Gc (2) NEPSI GYB15.1621X - Ex d IIB + H2 T5 Gb GB15322.1-2003 Fire protection INMETRO Ex db IIB+H2 T5 Gb Ex nA IIC T5 Gc |
iTrans 2 Digital Remote Sensor Transmitters |
|
---|---|
iTrans & iTrans 2 Replacement Sensors |
|
iTrans & iTrans 2 Mounting Kits |
|
iTrans & iTrans 2 Parts and Accessories |
|
By submitting your details you consent to their use in accordance with our Privacy Notice