Furse Fixings Bonds & Clamps

Square tape clamp

Manufactured from high quality copper and aluminium alloys. Simple to install, providing an effective low resistance connection between overlapping tapes to allow cross, tee, through and right angle joints to be formed.

Part numbers in this range include CT105-H, CT110-H and CT115-H.

DC tape clip

DC tape clips manufactured from high quality copper and aluminium alloys for excellent corrosion resistance and high pull off loads.

For use with bare copper, part numbers in this range include CP205, CP216, CP227, CP245, CP241 and CP256.
For use with bare copper (swing lid DC tape clip), part numbers in this range include CP210-H and CP220-H.
For use with PVC covered copper, part numbers in this range include CP215, CP225 and CP265.
For use with lead covered copper, part numbers in this range include CP305.

Adjustable DC tape clip

DC tape clips manufactured from high quality copper and aluminium alloys for excellent corrosion resistance and high pull off loads.

Part numbers in this range include CP230-H, CP240-H and CP260-H.

'B' bond

For bonding tape to steel structures.

Part numbers in this range include BN105, BN005 and BN113.

Metalwork bond

For connecting to all types of metal structures up to 13mm thickness.

Part numbers in this range include CS350 and CS355.

RWP bond

For bonding tape to rainwater pipes, handrails etc.

Part numbers in this range include BN115 and BN010.

Watermain bond

For bonding tape to large diameter pipes.

Part numbers in this range include BN120.

Pipe bond

For bonding to ducts and large diameter pipeworks.

Part numbers in this range include BN175 and BN176.

Pipe clamp

Part numbers in this range include 3902, 3903, 3904, 3905-TB, 3906-TB, 3907, 3908 and 3909-TB.

Flexible copper braid bond

Flexible copper or flexible tinned copper braid terminated with pressed ferrule connector at each end, suitable for bonding gates, doors, fences etc. Pressed ferrule connection ensures maximum electrical contact with minimum earth resistance.

Standard braid sizes are shown. Braids are available in other sizes, lengths, materials or terminations to special order.

Part numbers in this range include FBB-6-200-7, FBB-6-400-7, FBB-10-200-7, FBB-10-400-7, FBB-16-200-9, FBB-16-400-9, FBB-25-200-11, FBB-25-400-11, BN505, BN515, FBB-50-200-11, FBB-50-400-11, FBB-70-200-13, FBB-70-400-13, FBB-95-200-13, FBB-95-400-13, FBB-120-200-17, FBB-120-400-17, FBB-150-200-17, FBB-150-400-17, FBB-6-200-7-T, FBB-6-400-7-T, FBB-10-200-7-T, FBB-10-400-7-T, FBB-16-200-9-T, FBB-16-400-9-T, FBB-25-200-11-T, FBB-25-400-11-T, BN505-T, BN515-T, FBB-50-200-11-T, FBB-50-400-11-T, FBB-70-200-13-T, FBB-70-400-13-T, FBB-95-200-13-T, FBB-95-400-13-T, FBB-120-200-17-T, FBB-120-400-17-T, FBB-150-200-17-T and FBB-150-400-17-T.

Flexible circular copper braid bond

Flexible copper or flexible tinned copper braid terminated with pressed terminal lug at each end, suitable for bonding gates, doors, fences etc. Pressed terminal lug connection ensures maximum electrical contact with minimum earth resistance.

Standard braid sizes are shown. Braids are available in other sizes, lengths, materials or terminations to special order.

Part numbers in this range include CBB-6-200-7, CBB-6-400-7, CBB-10-200-7, CBB-10-400-7, CBB-16-200-9, CBB-16-400-9, CBB-25-200-11, CBB-25-400-11, CBB-50-200-11, CBB-50-400-11, CBB-70-200-13, CBB-70-400-13, CBB-95-200-13, CBB-95-400-13, CBB-6-200-7-T, CBB-6-400-7-T, CBB-10-200-7-T, CBB-10-400-7-T, CBB-16-200-9-T, CBB-16-400-9-T, CBB-25-200-11-T, CBB-25-400-11-T, CBB-50-200-11-T, CBB-50-400-11-T, CBB-70-200-13-T, CBB-70-400-13-T, CBB-95-200-13-T and CBB-95-400-13-T.

Static earth receptacle

For setting into roadways or runways. Provides a static discharge point for aircraft, fuel tankers, etc.

Part numbers in this range include RX005.

Eyebolt

Screws direct onto a copperbond earth rod, offering an earth point for boats, trucks etc.

Part numbers in this range include BT150 and BT160.

Straight setscrew type cable socket

For bonding copper and aluminium conductors to steelwork.

Part numbers in this range include SX450 and SX455.

Type H - High strength splitbolt connector

For copper to copper connections. No special tools required.

Part numbers in this range include 8H-FU, 4H-FU, 2H-FU, 1H-FU, 10H-FU, 20H-FU, 30H-FU, 40H-FU and 350M-FU.

Rebar clamp

For bonding to reinforcing bars, steam pipes, handrails etc.

Part numbers in this range include BN150 and BN155.